Tuning To Stations With The Tune A/V Buttons - Grundig YB500 Owner's Manual

•
Switch the unit on with the O N /O FF button (11) .
- The frequency tuned to appears in the display, on FM in
MHz, on AM in kHz.
- A separate tuning memory is provided for each waveband.
1. Frequency Tuning in the FM Band
• Select the FM waveband.
- You hear the station last received in the FM band.
•
You tune to the desired station by briefly pressing one of the
buttons TUNE △ or TUNE ▽ (19). Each pressure on the
button changes the tuning frequency by 25 kHz.
•
A longer pressure on one of the buttons TUNE △ or TUNE
▽ (19) starts the automatic station search.
TUNE ▽ =the search is started in direction of lower
frequencies.
TUNE △ =the search is started in direction of higher
frequencies.
- The station search operates in the 100 kHz mode.
- The display (4) indicates AS (Auto-Search) = automatic
station search.
The automatic station search will stop as soon as it has found
a station appropriate for good reception. It then can be
restarted by a longer pressure on one of the TUNE
buttons.
If the found station is an RDS station, the RDS symbol and the
station name (see "Special Functions on FM") will be displayed
after a few moments. In addition, the display (4) indicates O
for the tuning memory, and you will hear the station.

Tuning to Stations with the TUNE A/V buttons

/
△ ▽
16