Switching On And Off; Selecting The Input Source; Adjusting The Volume; Selecting Sound Settings - Grundig Cosmopolit 4 WEB DAB+ Manual

Table of Contents

Advertisement

GENERAL­FUNCTIONS
Switching­on­and­off
1 Switch on the device from standby mode
by pressing »
8
« on the remote control or
»ON/OFF« on the device.
– D isplay: The system switches to the last
source selected.
2 Switch the device to standby mode by pressing
»
8
« on the remote control or »ON/OFF« on
the device.
– Display: The current time and date.
Note:
The only way to disconnect the device from
T
the mains supply is to pull out the plug from
the wall socket.
Selecting­the­input­source
1 Press »M« repeatedly on the remote control or
»MODE« on the device to select »Internet Ra-
dio«, »Spotify«, »Music player«, »DAB Radio«,
»FM Radio« or »Aux In« on the display.
Note:
The input source can also be displayed using
T
the »Main menu«.
Adjusting­the­volume
1 Adjust the volume by pressing »
the remote control;
or
rotate the Jog-Shuttle on the device.
Selecting­sound­settings­
You can choose between different preset sound
settings.
By­using­»EQ«­button­on­the­remote­
control
1 Press »EQ« repeatedly on the remote control
to select the menu »Equaliser«.
2 Select your required sound setting (»Normal«,
»Flat«, »Jazz«, etc.) by pressing » « or » « or
by turning the Jog-Shuttle and confirm by press-
ing »OK«.
­---------------------------------------------------------------------------------------
By­using­the­menu­
1 Press »MENU« to open the menu.
2 Select the »Main menu« by pressing » « or
» « or by turning the Jog-Shuttle and confirm
by pressing »OK«.
3 Select the option »System settings« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
4 Select the option »Equaliser« by pressing » «
or » « or by turning the Jog-Shuttle and con-
firm by pressing »OK«.
5 Select your required sound setting (»Normal«,
»Flat«, »Jazz«, etc.) by pressing » « or » « or
by turning the Jog-Shuttle and confirm by press-
ing »OK«.
6 Press »MENU« to end the setting.

Muting

_
You can switch the device speaker to and from
« or »+« on
mute mode using this function.
1 Activate mute with » « on the remote control.
– Display: »
2 Deactivate mute with » « on the remote control.
– Display: »
4 Press »MENU« to end the setting.
Automatic­switch-off
1­The device switches automatically to stand-by
after 15 minutes, if:
– The device is in the "Stop" position;
– No audio signal is present at the »AUX«
2­Switch on the device again to continue using
the device.
Time/Date
Equaliser
Normal
Flat
Jazz
Rock
Movie
«.
« disappears.
socket.
23­
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents