Quick Reference - Empire Comfort Systems VFP30CA30 Series Installation Instructions And Owner's Manual

EMPIRE
EMPIRE
Comfort Systems
Clearances
In selecting a location for installation, it is necessary to provide adequate accessibility clearances for servicing and proper opera-
tion.
Locating the Vent Free Cast Iron Stove
When facing the front of the appliance the following minimum clearances to combustible construction must be maintained.
Top of appliance (ceiling)
Rear Wall
Side Wall
Provide adequate clearances around air openings.
Adequate accessibility clearances for purposes of servicing and proper operation must be provided.
Installation on Rugs and Tile
This appliance must be installed on a flat, solid, continuous surface (e.g. wood, metal, concrete). This may be the floor, or it may
be raised up on a platform to enhance its visual impact. The appliance may be installed on carpeting, vinyl, wood flooring or other
combustible material.
6" (153mm) TO SIDE WALL
OR COMBUSTIBLE
MATERIAL
26563-0-0410
Empire Comfort Systems
918 Freeburg Avenue
Belleville, Illinois 62220-2623
VFP30CA30B, VFP30CA30F, VFP30CA30M, VFP30CA30S,
Specifications
Model
Input BTU/HR (KW/H) Maximum
Height
Width
Depth
Gas Inlet (Pipe)
GAS-FIRED
36 inches Heater Corners (45° angle) to Wall 4 inches
2 inches Floor
6 inches
36" (91cm) TO CEILING OR
HORIZONTAL PROJECTION
ABOVE APPLIANCE
NOTE: HEATER INSTALLED AT
45° ANGLE IN CORNER
Web Site: www.empirecomfort.com
The Heritage Cast Iron Stoves
Models:
VFP30CA30W
BTU/HR (KW/H) Minimum
0 inches
4" (102mm) HEATER CORNERS
TO SIDE WALL
4"
(102mm)
VFP30CA30(B,F,M,S,W)
32,000 (9.4)
22,400 (6.6)
27 3/4" (704.9 mm)
28 1/16" (712.8 mm)
17 1/8" (435.0 mm)
3/8" (9.5 mm)
2" (51mm) TO COMBUSTIBLE MATERIAL
Page 31