Using Channel Search Button - Motorola APX 7000 User Manual

Using Channel Search Button

This feature allows you to do a quick search for a specific
channel in your radio by keying in the alias of the channel. If the
name matches, your radio prompts the first found matched
channel name.
Procedure:
Press the preprogrammed Channel Search button.
OR
Follow the procedure below.
< >
1 to CSrh.
or
2 Press the Menu Select button directly below CSrh to key in
the channel name.
3 A blinking cursor appears on the Channel Search screen.
Use the keypad to type or edit your message.
<
Press to move one space to the left.
>
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
*
Press to add a space.
0
Press to toggle between mixed case mode, uppercase
mode, and lowercase mode.
#
Press to toggle between numeric and letter mode.
4 Press the Menu Select button directly below CSrh once the
entry is done to initiate searching.
OR
Press the Menu Select button directly below Cncl to exit.
5
The display shows Searching.
OR
If the radio is triggered to search for an empty entry, the
display shows Invalid entry. Repeat step 3.
6
Once found, the display shows the matched channel name
and the radio changed its transmission to this channel.
OR
If the entry does not match, the display shows Channel
name not found. Repeat from step 3 if want to search
again; or press H or the Menu Select button directly below
Exit to exit.
37
English