Selecting A Channel By Using Channel Search Button; Mode Select Feature; Saving A Zone And A Channel To A Softkey - Motorola APX MOBILE O9 User Manual

Hide thumbs Also See for APX MOBILE O9:
Table of Contents

Advertisement

e. Press the PTT button to transmit on the displayed zone channel.
1.3

Selecting a Channel by using Channel Search Button

When and where to use: This feature allows you to do a quick search for a specific channel in your
radio by keying in the alias of the channel. Your radio prompts the first found channel if a match is
found.
Procedure:
1 Perform one of the following actions.
Press the preprogrammed Channel Search button.
or to CSrh and press the Menu Select button directly below CSrh.
A blinking cursor appears on the Channel Search screen.
2 Use the keypad to type or edit your channel name.
3 To initiate searching, press the Menu Select button directly below CSrh once the entry is done.
To exit this procedure, press the Menu Select button directly below Cancel .
One of the following scenarios occurs:
The display shows Searching. Once found, the display shows the matched channel name and the
radio changes its transmission to the selected channel.
If the radio is triggered to search for an empty entry, the display shows Invalid entry. Repeat
step 2
to search again.
If the entry does not match, the display shows Channel name not found.Repeat
search again; or press
1.4

Mode Select Feature

Mode Select allows a long press to save the current zone and channel of your radio to a programmable
button, keypad button, or a softkey; then once programmed, the short-press of that button or softkey
changes the transmission to the saved zone and channel.
There are two methods to save the selected zone and channel:
Softkeys
Programmable buttons and keypad buttons (digit 0 to 9)
NOTICE: Your radio must be preprogrammed for you to use this feature.
1.4.1

Saving a Zone and a Channel to a Softkey

When and where to use: Five softkeys are available for you to save the frequently used zone and
channel.
Procedure:
1 Toggle from your current zone and channel to the required zone and channel.
2
or to MS1, MS2 ... or MS5.
or the Menu Select button directly below Exit to exit.
68007024014-GK
General Radio Operation
step 2
to
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 7500Apx 8500

Table of Contents