Programming Over Project 25 (Pop 25) (Astro 25 And Astro Conventional) - Motorola APX 7000 User Manual

If the connecting process immediately follows the pairing
process and the connecting process fails to complete within
6 seconds, you hear a decremental-pitched tone to indicate
unpaired. The display shows LEX 700 unpaired. Repeat
step 1 to re-initiate the pairing process.
To unpair the LEX 700, follow the steps in Viewing and
Clearing the Bluetooth Device Information on page 118.
Programming Over Project 25 (POP 25)
(ASTRO 25 and ASTRO Conventional)
This feature enables configuration data to be upgraded to your
radio over-the-air. This feature retains full use of the radio
during the configuration data transfer without interrupting
communication. The upgrade pauses to give priorities to voice
call, and continues after the voice call ended.
Once a configuration upgrade is downloaded to your radio, you
can install new changes immediately or delay changes to be
installed on the radio when it is being powered up. Your radio
can also be configured to allow you to accept or reject an
upgrade.
Note: This feature must be preprogrammed by a qualified
radio technician. Check with your dealer or system
administrator for more information.
121
English