Motorola APX 7000 User Manual page 3

Dual display apx two-way radios
Hide thumbs Also See for APX 7000:
Table of Contents

Advertisement

®
ASTRO
APX™ 7000 Series
Digital Portable Radios
Quick Reference Card
RF ENERGY EXPOSURE AND PRODUCT SAFETY
GUIDE FOR PORTABLE TWO-WAY RADIOS
Before using this product, read the operating instructions
!
for safe usage contained in the Product Safety and RF
a u t i o n
Exposure booklet enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only to satisfy
FCC RF energy exposure requirements. Before using this
product, read the guide enclosed with your radio which contains
important operating instructions for safe usage and RF energy
awareness and control for compliance with applicable standards
and regulations.
Radio Controls
Top (Orange)
Button
__________
Microphone
Accessory
Connector
Main Display
Home Button
Keypad
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners. © 2009 – 2012 by Motorola Solutions, Inc. All Rights Reserved. 10/12
1303 East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side (Select)
Button
__________
PTT Button
Side Button 1
__________
3-Position A/B/C
Switch
__________
Side Button 2
__________
2-Position
Concentric Switch
__________
Radio On/Off
Secondary Speaker
• On – On/Off/Volume knob clockwise.
Menu Select
• Off – On/Off/Volume knob counterclockwise.
Buttons
Zones and Channels
• Zone – Zone switch to desired zone.
Data Feature
Button
• Channel – Channel switch to desired channel.
4-Way Navigation
Button
Receiving and Transmitting
Antenna
1
Select zone/channel.
2
Listen for a transmission.
OR
Press and hold Volume Set button.
OR
Top
Press Monitor button and listen for activity.
Display
3
Adjust volume, if necessary.
Bluetooth
Pairing
4
Press the PTT button to transmit; release to
Indicator
receive.
Main
Speaker
Sending an Emergency Alarm
1
Press and hold the Emergency button*.
The display shows Emergency and the
2
Battery
current zone/channel. Radio sounds a short,
medium-pitched tone, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
* Default emergency button press timer is set
to 1 second. This timer is programmable, see
page 67 in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
68007024034-E
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents