Dimplex DF3003 Owner's Manual page 13

1. Ensure that power is supplied through the
main service panel.
2. Access the manual controls, (remove glass
doors or pull grill down if applicable) pull the
right side steel curtain to the outside of the
unit (if applicable).
3. Locate manual controls.
4. Activate main power switch.
5. Press and hold the ON switch marked "
for five (5) seconds (red indicator light will
flash).
6. Press the ON button located on the remote
control transmitter.
This will synchronize the remote control
transmitter and receiver.
Remote Control Usage
The remote control operates the fireplace levels
sequentially. The level is increased every time
the ON button on the transmitter is pressed.
The fireplace can be turned off at any point by
pressing the OFF button on the remote control
transmitter.
Level 1: The flame effect is turned on and the
first red indicator light illuminates.
Level 2: The flame effect remains on, the
heater is activated to the low heat setting,
and the first and second red indicator lights
illuminate.
Level 3: The flame effect remains on, the heater is set to the high heat
setting, and all three red indicators illuminate.
Battery Replacement (Figure 6)
To replace the battery:
1. Slide battery cover open on the hand held transmitter.
"
13
Figure 6
OFF
Button
ON
Button
Battery
Cover