Tecsun PL-390 Operation Manual page 18

3. Press the [
with [30] shows on display,
then rotate the [TUNING] knob
to select 1 ~ 90 minutes to set
the Auto Alarm Off Timer.
4. Press the [
confirm.
※ If the [
seconds; the unit will automatically confirm the setting.
The unit will turn on automatically with the preset station
when it reaches the alarm time. It will auto turn off as
well when it reaches the preset alarm off timer.
HOW TO ACTIVATE / DEACTIVATE THE ALARM
You can press the [
activate/deactivate the alarm by buzzer / radio respectively.
- If " " shows on the display, it means the alarm by
buzzer is turned on.
- If " " shows on the display, it means the alarm by radio
is turned on.
- If " " / "
alarm by buzzer / radio is turned off.
HOW TO TURN OFF WHEN ALARMING
Buzzer alarm: Press the [POWER] button to turn off the
Radio alarm: Press once the [POWER] button to
Note: If the preset alarm is activated when you are
listening to the radio, it will auto switch to the preset
radio station.
16
] button again
] button again to
] button has not been pressed again within 3
] or [
" does not show on the display, it means the
alarm.
continuously listening to the radio, press
twice to turn off the station alarm.
Auto sleep timer
] button repeatedly to
PL-390