Console, Charger, And Rear Electronics; Nylon Lock Nut Replacement; Storing Your Travel Scooter; Disposal Of Your Scooter - Pride Mobility Go-Go Ultra X Owner's Manual

X . C A R E A N D M A I N T E N A N C E
BATTERY TERMINAL CONNECTIONS
Make certain that the terminal connections remain tight and are not corroded.
ABS PLASTIC SHROUDS
The shroud pieces are formed from durable ABS plastic and are coated with an advanced formula urethane paint.
A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
The motor brushes are housed inside of the motor/transaxle assembly. They should be inspected periodically for
wear by your authorized Pride Provider.

CONSOLE, CHARGER, AND REAR ELECTRONICS

Keep these areas free of moisture.
Allow these areas to dry thoroughly if they have been exposed to moisture before operating your Travel
Scooter again.

NYLON LOCK NUT REPLACEMENT

Any nylon insert lock nut removed during the periodic maintenance, assembly or disassembly, of the Travel Scooter
must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.

STORING YOUR TRAVEL SCOOTER

If you plan on not using your Travel Scooter for an extended period of time, it is best to:
1. Fully charge its batteries prior to storage.
2. Remove the battery pack from the Travel Scooter.
3. Store your Travel Scooter in a warm, dry environment.
4. Avoid storing your Travel Scooter where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
For prolonged storage, you may wish to place several boards under the frame of your Travel Scooter to raise it off
of the ground. This takes the weight off the tires and reduces the possibility of flat spots developing on the areas of
the tires contacting the ground.

DISPOSAL OF YOUR SCOOTER

Your Travel Scooter must be disposed of according to applicable local and national statutory regulations. Contact
your local waste disposal agency or authorized Pride Provider for information on proper disposal of packaging,
metal frame components, plastic components, electronics, and batteries.
Go-Go Ultra X www.pridemobility.com
35