Charger - Pride Mobility SPORTRIDER SR-XL3 MVSR Owner's Manual

5. B AT T E RY C H A R G I N G A N D C A R E

Attention: Please follow the rules below to avoid accidents while charging.
Please use our charger only, and recharge the battery to its full capacity every time. You may
1.
damage the battery and scooter if you use a charger which is not to the correct specification.
Never disassemble or modify the charger.
2.
Please charge in a well-ventilated space where it is not directly exposed to the sunlight. Do not
3.
charge in surroundings where it is humid or under rainfall and morning dews.
Do not cover with a waterproof cloth or other objects while charging.
4.
Do not charge in temperatures less than -10°C or higher than +50°C as the charger may not work
5.
well and the batteries may become damaged.
I N G A N D C A R E 5 . B AT T E RY C H A R G I N G N D
WARNING!
Keep away from flammable objects while charging as it may lead to fire or explosion of battery.
1.
Do not smoke while charging as the battery may release hydrogen gas. Always charge your battery in
2.
a well-ventilated space.
Never connect or disconnect the plug or cord with wet hands while charging. Do not connect or
3.
disconnect the plug or cord when they are wet, it may lead to electric shock.
NOTE: The inhibit function will be activated while your scooter is in charging status, which will make
your scooter not run.

5.2 CHARGER

Both the chargers red and orange LEDs will be switched ON during charging. The orange LED will turn
green when charging completed.
WARNING!

The fan inside the charger will be activated accordingly when you turn on the charger. If the fan does
not work when connected to the charger or the green light is not showing, DO NOT use this charger. It
may lead to overheating of the charger and cause a fire as a result.

There is a red LED present on the charger to illustrate operation. If this LED does not illuminate the
charger is defective, please contact your dealer.
User Manual (Page 21 of 30)