Setting Up A Wireless Connection With The Wps Button - Huawei HG232f User Manual

300mbps wireless router
Hide thumbs Also See for HG232f:
Table of Contents

Advertisement

www.4GSource.net
4 Configuration of WLAN Parameters
7. In the dialog box, enter the password you recorded in Step 1, and then click Connect.
After the system verifies the password, Connected appears on the wireless network icon
in the wireless network list, indicating that your computer has established a wireless
connection to the HG232f.
Step 4
Close Wireless Network Connection dialog box.
----End
4.2 Setting Up a Wireless Connection With the WPS
Button
The HG232f supports the WPS function. If your network adapter also supports the WPS
function, you can use the WPS function to set up a wireless connection between your
computer and the HG232f quickly. To set up such a wireless connection:
Step 1
Check whether the WLAN indicator light of the HG232f is on. If the WLAN indicator
light is off, press the WLAN button on the side panel of the HG232f to enable the
WLAN function.
Step 2
Press and hold the WPS button for 2 or more seconds on the side panel of the HG232f.
The WPS indicator light of the HG232f starts blinking. If the WPS indicator light does
not start blinking, the WPS function cannot be enabled. For solutions to other WPS
issues, see chapter 7 "FAQs."
Step 3
Enable the WPS negotiation function of the wireless network adapter on your computer
within 2 minutes, and then wait for a short while (typically 10 seconds, at most 120
seconds).
For details, see the user guide provided by the vendor of your wireless adapter.
The HG232f WPS indicator light stops blinking and remains lit, indicating that the
HG232f is connected to your computer over the WLAN. This state lasts 300 seconds.
The WPS indicator light then turns off.
----End
You need to set up a wireless connection only once. You can access the wireless network
anytime you want as long as the wireless network name and password are not changed.
When the HG232f is working properly, your computer connects to the HG232f
automatically after the computer's wireless function is enabled.
4-2
HG232f 300Mbps Wireless Router
User Guide
Issue 01 (2012-05-08)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents