Operation; Selecting The Display Weight; Setting The Clock - Amana Radarange AMC5108AAB/W Owner's Manual

AMC5108AA_GB.fm Page 8 Thursday, March 11, 2004 9:50 AM

Operation

Selecting the Display Weight

The first time you plug the power cord into an outlet, or after there has been an
interruption in power, the display will show all indicators. At this point, you can
select the weight system for the display. You can choose between pounds (LBS)
or kilograms (KG). To do so you can choose between pounds (LBS) and
kilograms (KG).
1
Press "0" immediately after plugging in your microwave. The
display will show:
START ENTER TIME HEAT MICRO
Kg g Oz Lbs QTY
If the display does not shows "Kg", you will need to unplug the
microwave and then plug it in again in order to change to the
weight selection.
2
Press "0" repeatedly to select the weight system you wish to use:
When you have selected the weight system you want to use,
press the Pause/Cancel button to end this procedure.

Setting the Clock

1
Press the Clock Button. The display will show:
START ENTER COOK TIME HEAT MICRO
Kg g Oz Lbs QTY
2
Use the Number buttons to enter the current time. You must
press at least three numbers to set the clock. For example, if the
current time is 5:00, enter 5,0,0.
3
Press the Clock button again. A colon will blink, indicating that
the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by
pressing the Clock button.
8