Configuration Guide; Configuring Ht503 Through Voice Prompt - Grandstream Networks HT503 User Manual

C
ONFIGURATION

Configuring HT503 through Voice Prompt

DHCP M
ODE
Follow Table 4 with voice menu option 01 to enable HT503 to use DHCP.
STATIC IP M
ODE
Follow Table 4 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02,
03, 04 to set up HT503's IP, Subnet Mask, Gateway respectively.
F S IP A
IRMWARE ERVER DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C S
ONFIGURATION ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U P
PGRADE ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP, HTTP and HTTPS.
F U M
IRMWARE PGRADE ODE
Select voice menu option 17 to choose firmware upgrade mode. There are three options:
1) always check, 2) check only when pre/suffix changes, and 3) never upgrade
WAN P W A
ORT EB CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.
Grandstream Networks, Inc.
G
UIDE
IP A
DDRESS
HT503 User Manual
Firmware 1.0.1.57
Page 17 of 37
Last Updated: 3/2010