Configuration Guide; Obtain Ht818 Ip Address Via Connected Analogue Phone; Understanding Ht818 Interactive Voice Prompt Response Menu; Table 5: Voice Prompt Menu - Grandstream Networks HT818 Administration Manual

CONFIGURATION GUIDE

The HT818 can be configured via one of two ways:
•
The IVR voice prompt menu.
•
The Web GUI embedded on the HT818 using PC's web browser.

Obtain HT818 IP Address via Connected Analogue Phone

HT818 is by default configured to obtain the IP address from DHCP server where the unit is located. In
order to know which IP address is assigned to your HT818, you should access to the
Response Menu" of your adapter via the connected phone and check its IP address mode.
Please refer to the steps below to access the interactive voice response menu:
1. Use a telephone connected to phone ports (FXS) of your HT818.
2. Press *** (press the star key three times) to access the IVR menu and wait until you hear "Enter
the menu option ".
3. Press 02 and the current IP address will be announced.

Understanding HT818 Interactive Voice Prompt Response Menu

The HT818 has a built-in voice prompt menu for simple device configuration which lists actions, commands,
menu choices, and descriptions. The IVR menu works with any phone connected to the HT818. Pick up the
handset and dial "***" to use the IVR menu.
Menu Voice Prompt
Main "Enter a Menu Option"
Menu
01 "DHCP Mode",
"Static IP Mode"
"PPPoE Mode"

Table 5: Voice Prompt Menu

Options
Press "*" for the next menu option
Press "#" to return to the main menu
Enter 01-05, 07,10, 12-17,47 or 99 menu options
Press "9" to toggle the selection
If using "Static IP Mode", configure the IP address
information using menus 02 to 05.
If using "Dynamic IP Mode", all IP address information
comes from the DHCP server automatically after reboot.
If using "PPPoE Mode", configure PPPoE Username
and Password from web GUI to get IP from your ISP.
HT818 Administration Guide
Version 1.0.27.2
"Interactive Voice
P a g e | 20