Alcatel-Lucent OmniSwitch 6850 Series Hardware User's Manual page 67

OmniSwitch 6850 Series Chassis and Hardware Components
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-54. For information on the chassis rear panel, refer to
USB Port
High speed (480 Mbps) USB 2.0
port, which can be used for quick
upgrades.
OK PRI PWR BPS
OmniSwitch 6850-P48
1 2 3
USB
1 2 3 4
CLASS 1 LASER PRODUCT
Console
Console Port
The OS6850-P48 front panel
provides one RJ-45 port for con-
sole connections. Console con-
nections are used by network
administrators for switch man-
agement. This female RJ-45 con-
nector provides a DTE console
connection.
OmniSwitch 6850 Series Hardware Users Guide
4 5 6 7 8 9 10 11 12 13 14 15 16 17
Combo SFP
The OS6850-P48 provides four combo SFP connec-
tors for 1000Base-X high-speed connections.
By default, when an SFP is installed in a combo port,
it takes over the port number of the corresponding RJ-
45 Ethernet port. In other words, if an SFP is installed
in the slot labeled 4, Ethernet port 4 is no longer avail-
able and cannot be used for 10/100/1000 traffic. This
default setting is referred to as "preferred fiber." Refer
to "Configuring Ethernet" in the Network Configura-
tion Guide for detailed information, including steps
for configuring combo port settings.
OmniSwitch 6850-P48 Front Panel
August 2007
page 2-56.
Status and Slot Indicator LEDs
For information on the OS6850-P48's
status and slot indicator LEDs, refer to
page 2-54.
18 19 20 21 22 23 24 25 26 27 28 29 30 31
OmniSwitch 6850-P48
32 33 34 35 36 37 38 39 40 41 42 43 44 45
10/100/1000Mbps PoE
The OS6850-P48 provides
44 fixed 10/100/1000BaseT
non-combo PoE (5–48) and
4 fixed
10/100/1000BaseT
PoE (1–4). These are auto-
sensing and auto-MDIX and
use RJ-45 connectors.
page 2-43
46 47 48
combo