Table of Contents
Advertisement
Safety Instructions for Machinery
7. KEEP CHILDREN AND VISITORS AWAY.
Keep all children and visitors a safe dis-
tance from the work area.
8. MAKE WORKSHOP CHILD PROOF. Use
padlocks, master switches, and remove
start switch keys.
9. NEVER LEAVE WHEN MACHINE IS
RUNNING. Turn power OFF and allow all
moving parts to come to a complete stop
before leaving machine unattended.
10. DO
NOT
USE
ENVIRONMENTS. DO NOT use machin-
ery in damp, wet locations, or where any
flammable or noxious fumes may exist.
11. KEEP WORK AREA CLEAN AND WELL
LIT. Clutter and dark shadows may cause
accidents.
12. USE
A
GROUNDED
CORD
RATED FOR THE MACHINE
AMPERAGE. Undersized cords overheat
and lose power. Replace extension cords
if they become damaged. DO NOT use
extension cords for 220V machinery.
13. ALWAYS DISCONNECT FROM POWER
SOURCE
BEFORE
MACHINERY. Make sure switch is in OFF
position before reconnecting.
14. MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
15. MAKE SURE GUARDS ARE IN PLACE
AND WORK CORRECTLY BEFORE
USING MACHINERY.
-6-
IN
DANGEROUS
EXTENSION
SERVICING
16. REMOVE
ADJUSTING
WRENCHES. Make a habit of checking for
keys and adjusting wrenches before turn-
ing machinery ON.
17. CHECK
FOR
BEFORE USING MACHINERY. Check
for binding and alignment of parts, broken
parts, part mounting, loose bolts, and any
other conditions that may affect machine
operation. Repair or replace damaged
parts.
18. USE RECOMMENDED ACCESSORIES.
Refer to the instruction manual for recom-
mended accessories. The use of improper
accessories may cause risk of injury.
19. DO NOT FORCE MACHINERY. Work at
the speed for which the machine or acces-
sory was designed.
20. SECURE WORKPIECE. Use clamps or
a vise to hold the workpiece when practi-
cal. A secured workpiece protects your
hands and frees both hands to operate the
machine.
21. DO NOT OVERREACH. Keep proper foot-
ing and balance at all times.
22. MANY
MACHINES
THE
WORKPIECE
OPERATOR. Know and avoid conditions
that cause the workpiece to "kickback."
23. ALWAYS
LOCK
BEFORE OPERATING MACHINERY.
H6246 Meat Cutting Bandsaw
KEYS
AND
DAMAGED
PARTS
WILL
EJECT
TOWARD
THE
MOBILE
BASES
Advertisement
Table of Contents
