Closure - Grizzly G1128 Instruction Manual

SECTION 8: CLOSURE
The following pages contain general machine
data, parts diagrams/lists, trouble shooting guide
and Warranty/Return information for your Model
G1128/G1129 Power Feeder.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call the appropriate region-
al Service Department. Our trained service tech-
nicians will be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
Introduction. The specifications, drawings, and
photographs illustrated in this manual represent
the Model G1128/G1129 as supplied when the
manual was prepared. However, due to Grizzly's
policy of continuous improvement, changes may
be made at any time with no obligation on the part
of Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, add the new
information to this manual and keep it for refer-
ence.
We have included some important safety mea-
sures that are essential to this machine's opera-
tion. While most safety measures are generally
universal, Grizzly reminds you that each work-
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
-18-
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the appropri-
ate regional Service Department listed in the
introduction.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
WARNING!
As with all power tools, there is danger associat-
ed with the Model G1128/G1129 Power Feeder.
Use the tool with respect and caution to lessen
the possibility of mechanical damage or operator
injury. If normal safety precautions are over-
looked or ignored, injury to the operator or others
in the area is likely.
The Model G1128/G1129 was specifically
designed for feeding wood through a table saw or
shaper. DO NOT MODIFY AND/OR USE THIS
POWER FEEDER FOR ANY OTHER PUR-
POSE. Modifications or improper use of this
tool will void the warranty. If you are confused
about any aspect of this machine, DO NOT use it
until you have answered all your questions.
G1128/G1129 Power Feeders