Hawking Hi-Gain HAWNR3 User Manual page 93

Access Control (1):
MAC Address (2):
Comment (3):
Add (4):
Clear (5):
Delete Selected (6):
Delete All (7):
After you finish with all settings, please click 'Apply' (8) button and the
following message will be displayed on your web browser:
'Enable Wireless Access Control'. When this item is unchecked,
wireless router will not enforce MAC address filtering of
wireless clients.
Input the MAC address of your wireless devices here, dash ( - )
or colon ( : ) are not required. (i.e. If the MAC address label of
your wireless device indicates 'aa-bb-cc-dd-ee-ff' or
'aa:bb:cc:dd:ee:ff', just input 'aabbccddeeff'.
You can input any text here as the comment of this
MAC address, like 'ROOM 2A Computer' or
anything. You can input up to 16 alphanumerical
characters here. This is optional and you can leave
it blank, however, it's recommended to use this field
to write a comment for every MAC addresses as a
memory aid.
Click 'Apply' button to add the MAC address and associated
comment to the MAC address filtering table.
Click 'Clear' to remove the value you inputted in MAC address
and comment field.
If you want to delete a specific MAC address entry, check the
'select' box of the MAC address you want to delete, then click
'Delete Selected' button. (You can select more than one MAC
addresses).
If you want to delete all MAC addresses listed here, please click
'Delete All' button.
92