Page 5
CD-Rom drive. Wait for the Auto-Load Folder to load. If the page does not load, please click on the “HWRGM1A Setup CD” icon on your desktop to load the folder. Once the folder is open, click on the file “ CLICK HERE TO START .” This should open up the Setup Wizard Window.
You do not need to change the Time Server Address. You can also adjust your time settings to support Daylight Savings Time. To do so click Enable and enter the correct times for Daylight Savings. Select NEXT to continue. HWRGM1A Hawking Technologies, Inc.
Page 8
Fill out the required information and select NEXT to continue. If you are not sure of some of the requested requirements please check with your network administrator or your internet service provider. HWRGM1A Hawking Technologies, Inc.
WIRELESS SECURITY SETUP Hawking recommends that you enable wireless security within your network. Note that implementing wireless security may have an impact on your network’s performance, but if you are transmitting sensitive data, enabling wireless security should give you peace of mind that your network is safe from intruders.
Page 11
64-Bit Key: 10 digit key. Characters can be numerical (0-9) or letters (A -F) or a combination. Sample 64Bit Key: 0A12B3C45D 128-Bit Key: 26 digit key. Same characters as 64Bit. Sample 128Bit Key: 0000011111AAAAAFFFFF222222 Select APPLY to complete your installation. The router will reboot. HWRGM1A WEP Encyption Hawking Technologies, Inc. P 10...
Please save your encryption keys in a safe place. (If you happen to forget your key you may reset the router to regain access) Your router is now successfully setup for wired and wireless networking! HWRGM1A WPA Encyption Hawking Technologies, Inc. P 11...
- View the list of ISP connection types - Select your ISP type and click NEXT 4) Setup your Wireless Network - Enable wireless access to your network - Select an ID for your wireless network Hawking Technologies, Inc. P 12...
Page 14
5) Setup Wireless Security 6) Setup Summary – Click “SET” to apply - Enable or Disable wireless security - Wait for your router to reboot. - View pg 9 -11 for Security setup information HWRGM1A Hawking Technologies, Inc. P 13...
Page 15
IMPORTANT TEST – PLEASE COMPLETE In order for all computers connected to the Wireless Router to work they must be configured correctly. To test this, please open your web browser and type www.hawkingtech.com in your web browser’s address bar. If this does not work, POWER OFF YOUR CABLE MODEM OR DSL MODEM FOR 30 SECONDS.
Follow the same steps as listed above for the “Built -In Ethernet” however for step 3 follow this step instead: 3.) In the Network bar select the drop down menu in the Show field and select Airport. The rest of the steps are exactly the same as those listed above. HWRGM1A Hawking Technologies, Inc. P 15...
Page 17
3.) Be sure to check the selection entitled “Obtain an IP address automatically” if it has not yet been chosen. Select OK. Your computer may request for you to reboot at this time. If so, reboot and test your connection. HWRGM1A Hawking Technologies, Inc. P 16...
This section covers some common problems that may be encountered while using the Wireless Router and some possible solutions to them. If you follow the suggested steps and the Wireless Router still does not function properly, contact your dealer for further advice.
Some applications do not run properly when using the Wireless Router. Solution 2: The Wireless Router processes the data passing through it, so it is not transparent. Use the Special Applications feature to allow the use of Internet appli cations which do not function correctly.
To obtain the high est possible connection speed, you can experiment with the following: Wireless Router location. Try adjusting the location and orientation of the Wireless Router. Wireless Channel If interference is the problem, changing to another channel may show a marked improvement.
Page 21
IP settings, or if the Router is on Static IP a nd DHCP is off. Lost network password Hit the RESET button on the back panel of the Router for over 5 seconds and the Router will return to default settings. (Login: Admin, Password: None). HWRGM1A Hawking Technologies, Inc. P 20...
Page 22
To get the latest version of AirPort software that works with your version of Mac OS X, use Software Update preferences. Does my Airport Express work with the Hawking Wireless Router? Yes, set up the Airport Express in Client mode and have it detect and connect to your wireless router using the SSID you have chosen. (default hawking) HWRGM1A Hawking Technologies, Inc.
Page 23
HWRGM1A Hawking Technologies, Inc. P 22...