Table of Contents
Advertisement
Private IP (2):
Computer Name (3):
Type (4):
Port Range (5):
Comment (6):
Add (7):
Reset (8):
Port Forwarding
Table (9):
Delete Selected (10):
Delete (11):
Delete All (12):
Reset (13):
Click 'Cancel' (14), if you do not want to make any changes.
After you finish with all settings, please click 'Apply' (15) button and the
Input the IP address of the computer on local network which
provides internet service.
Pull down the menu and all the computers connected to the
router will be listed here. You can easily to select the computer
name without checking the IP address of the computer.
Select the type of connection, TCP or UDP. If you are not sure,
please select 'Both'.
Input the starting port number in the left field, and input the
ending port number in the right field. If you only want to
redirect a single port number, just fill the port number in the left
field.
Please input any text to describe this mapping, up to 16
alphanumerical characters.
Add the mapping to port forwarding table.
Remove all inputted values.
All existing port forwarding mappings will be displayed
here.
Please select a port forwarding mapping by clicking the
'Select' box of the mapping, then click 'Delete Selected' button
to remove the mapping. If there's no existing mapping, this
button will be grayed out.
Delete selected existing mapping in virtual server table.
Delete all mappings existed in virtual server table.
Unselect all mappings.
108
Advertisement
Table of Contents
