Altigen IP 705 User Manual page 39

Restore 1) Press the Menu button.
Default
2) Press * * 2, then the Enter button.
Settings
Ring Tones 1) Press the Menu button.
2) Select PHONE SETTING, and scroll to RING TONES.
3) Select a ring tone and press the Enter button.
Program- 1) Press the appropriate key (keys 1-5) to initiate one of the
mable Key*
•
N/A
•
BLF
•
Feature
Code
•
Admin
Defined #
•
EXT
Speed Dial
•
Line Park
•
Call
Record
•
User
Defined #
•
Headset
Speaker To use the speakerphone:
1) Press the Speaker button.
2) To disconnect the call, press the Speaker button again.
Transfer* During a call:
1) Press the Transfer button, which places the call on hold.
2) Dial the number you want to transfer the call to.
3) Hang up if the party answers the call, or press Transfer
4) If the party refuses the call, return to the original call by
Voice Mail 1) Press the Voice Mail button.
2) Enter voice mail password.
•
•
following functions pre-assigned by the system
administrator: Busy Lamp Field, AltiServ Feature Code,
Admin Defined #, EXT Speed Dial, Line Park, Call Record,
User Defined #, Headset.
To configure a programmable key with Phone Setting
enabled:
a.
Press the Menu button, select PHONE SETTING, and
press the Enter button.
b.
Scroll to PROGRAM KEYS and press Enter.
c.
Select the key to program, and press Enter.
d.
Enter the appropriate digits for the speed dial number or
feature code, and press Enter.
The digits are automatically dialed when this function key is
pressed.
again to complete transferring.
pressing the button or the Flash button.
The Message Waiting light blinks when a voice mail
message is waiting.
The LCD displays the new voice mail count (which includes
only unheard messages) when onhook.
User Guide
IP 705 Manual 31