Table of Contents
Advertisement
2-3. Adjusting Color
●
To select the display mode (color mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode
1-User1
2-User2
3-User3
4-Paper
®
5-Adobe
RGB
6-sRGB
7-CAL
Note
• In CAL mode, ColorNavigator can be used for adjustment.
• Available CAL mode differs depending on each input signal.
Attention
• Avoid operating any function of the monitor while using ColorNavigator. Regarding ColorNavigator, see
ColorNavigator" (page
Procedure
1. Press
.
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time
You can switch the mode with
Note
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specific mode to be selected. For more information, see
(page
31).
• "ScreenManager Pro for LCD" allows you to select the color mode automatically according to the application used (see
"Chapter 3 Auto FineContrast" in the "ScreenManager Pro for LCD" User's Manual).
Availableforthecolorsettingsaccordingtoyourpreference.
Producesaprintedpapereffectbydecreasingcontrastandcolortemperature.
SuitableforcolormatchingwithAdobe
SuitableforcolormatchingwithsRGBcompatibleperipherals.
Displaysthescreenadjustedby"ColorNavigator"calibrationsoftware.
10).
Example:AtDVIinput
Themodemenu
appears.
1-User1←→2-User2←→3-User3←→4-Paper
7-CAL←→6-sRGB←→5-Adobe
or
while the mode menu is displayed.
Purpose
®
RGBcompatibleperipherals.
®
RGB
is pressed.
"3-1. Enabling/Disabling Mode Selection"
Chapter2AdjustingScreens
"To use
17
Advertisement
Table of Contents
