4.
Insert the plug end of the security cable into the lock (1) and push the button in (2) to engage the
lock. Use the key provided to disengage the lock.
Figure 9-63
Front Bezel Security
The front bezel can be locked in place by installing a security screw provided by HP. To install the
security screw:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Remove one of the five silver 6-32 standard screws located on the front of the chassis behind the
bezel.
Figure 9-64
5.
Replace the front bezel.
Engaging the Lock
(Access Panel on page
(Front Bezel on page
Retrieving the Front Bezel Security Screw
(Preparation for Disassembly on page
121).
122).
120).
External Security Devices 171