Assembly; Base Frame (; Front Stabilizer 1; Front Extension 1 - Smooth Fitness EVO RIO GRANDE II Owner's Manual

Step 1:
Only hand tighten fasteners for
now. You will be prompted to fully
tighten all fasteners later.
Place the Base Frame (1) on the floor
and cap the ends with two 2" x 3" Rect
End Caps (56). Cap the Front
Stabilizer (2) with two 2" x 3" Rect End
Caps (56). Cap the Front Extension
(3) with the 2" Sq End Cap (57).
Attach the Front Stabilizer (2) and the
Front Extension (3) to the Base Frame
(1) using two 1/2" x 4" Hex Head Bolts
(77), four 1/2" Washers (95) and two
1/2" Nylon Nuts (99).
Attach the Press Upright (4) to the
Front Stabilizer (2) using two 1/2"
Washers (95) and two 1/2" Nylon Nuts
(99). Thread the Pop Pin (71) into the
Press Upright (4).
Cap the Pec Dec Upright (5) with the
2" x 3" Rect End Cap (58) and the 2"
Sq End Cap (60). Attach the Pec Dec
Upright (5) to the Base Frame (1)
using two 1/2" Washers (95) and two
1/2" Nylon Nuts (99).
Attach the Top Frame (7) to the Press
Upright (4) and the Pec Dec Upright
(5) using four 1/2" x 4" Hex Head Bolts
(77), eight 1/2" Washers (95) and four
1/2" Nylon Nuts (99).
-10-