Searching For A Desired Song; Quick Search - Alpine CDA-105Ri Owner's Manual

2
Press or to select the desired song.
Return to the beginning of the current song:
Press .
Fast backward through current song:
Press and hold .
Advance to the beginning of the next song:
Press .
Fast forward through current song:
Press and hold .
3
To pause playback, press
Pressing / again will resume playback.
• A song playing on the iPhone/iPod while it is connected to this unit
will continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by pressing
• An episode may have several chapters. The chapter can be changed
by pressing or .

Searching for a desired Song

An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organised in playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the
PLAYLIST/ARTIST/ALBUM/SONG/PODCAST/GENRE/
COMPOSER/AUDIOBOOK search mode to narrow searches based on
the table below.
Hierarchy 1 Hierarchy 2
PLAYLIST SONG
ARTIST* ALBUM*
ALBUM* SONG
SONG —
PODCAST EPISODE
GENRE* ARTIST*
COMPOSER* ALBUM*
AUDIOBOOK —
For example: Searching by Artist name.
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press /ENT to activate the search selection mode.
2
Turn the Rotary encoder to select the ARTIST
search mode, and then press
PLAYLIST ARTIST
GENRE COMPOSER
3
Turn the Rotary encoder to select the desired
Artist, and then press
4
Turn the Rotary encoder to select the desired
Album, and then press
/ .
or .
Hierarchy 3 Hierarchy 4
— —
SONG —
— —
— —
— —
ALBUM* SONG
SONG —
— —
/ENT.
ALBUM SONG PODCAST
PLAYLIST
AUDIOBOOK
/ENT.
/ENT.
5
Turn the Rotary encoder to select the desired
Song, and then press
The selected song is played back.
• After pressing and holding
each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs of the selected hierarchy are played back.
• After selecting [ALL] in the search mode with "*", press and hold
/ENT for at least 2 seconds to play back all songs in the iPhone/
iPod or selected search mode.
• While in the search mode, if you press and hold
seconds, or no operation is performed for 30 seconds, the search
mode is cancelled.
• In the search mode, pressing
mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
• "NO SONG" will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
• "NO PODCAST" will be displayed if there is no podcast data in the
iPhone/iPod in the PODCAST search mode.
• "NO AUDIOBOOK" will be displayed if there is no audiobook data
in the iPhone/iPod in the AUDIOBOOK search mode.
• If "iPod name" stored in the iPhone/iPod is selected in the desired
Playlist search mode, and
songs in the iPhone/iPod. Also, if you press and hold
least 2 seconds, all songs in the iPhone/iPod are played back.
• Depending on the iPhone/iPod, podcast search is not supported.
• If Alphabet Skip Function is activated in the search mode, a search
can be made quickly by Alphabet skip function to find the desired
artist or song, etc. For details, refer to "Alphabet Skip Function" on
page 24.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 24.
• If no operation is performed for 30 seconds during search mode, the
unit will return to normal mode.

Quick Search

You can search a song from all songs in the iPhone/iPod without
selecting an album, artist, etc.
1
Press and hold /ENT for at least 2 seconds to
activate the Quick Search mode.
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
• Press /ESC in the search mode to cancel. Or, the search mode is
cancelled if no operation is performed for 10 seconds.
• If many songs are in the iPhone/iPod, it takes time to search for
songs.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 24.
• This function is inactive during repeat (
/ENT.
/ENT for at least 2 seconds while in
/ESC for 2
/ESC will return to the previous
/ENT is pressed, you can search for all
/ENT for at
) playback.
23
-EN