Repeat Play; Random Play); Searching For Cd Text - Alpine CDA-105Ri Owner's Manual

5
To pause playback, press
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel,
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
• The " " indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs cannot be used.
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• "MP3" is displayed during MP3 playback.
• "WMA" is displayed during WMA playback.
• "AAC" is displayed during AAC playback.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Folder number
display
• Press VIEW to switch the display. See "Displaying the Text" on
page 18 for information about display switching.

Repeat Play

Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back.
: A disc is repeatedly played back.
1
* When a CD changer is connected.
• If is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
: A disc is repeatedly played back.
12
-EN
/ .
for at least 2 seconds.
File number
display
2
* When an MP3 compatible CD changer is connected.
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing F/SETUP to select the function mode (
perform the operation within 10 seconds.
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
CD mode :
: The tracks are played back in random
sequence.
: The tracks on all the CDs in the current
magazine will be played back in the random
sequence.
3
* When a CD changer equipped with the ALL M.I.X. function is
connected.
• If is set to ON during
changer mode, M.I.X. will apply to the current disc only.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: The files are played back in random
sequence.
If an MP3 compatible CD changer is
connected, all files in a disc are played back
in random sequence, and playback shifts to
the next disc.
4
* In the USB mode, all files stored in the USB memory are played back
in random sequence, and the "
• When a song is played back during Random (M.I.X.) play in the USB
mode, the song can be played back again randomly even if not all
songs on the USB Memory have been played back.
• If a CD changer or an MP3 compatible CD changer is connected:
After pressing F/SETUP to select the function mode (
perform the operation within 10 seconds.

Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
1
Press /ENT during play.
This will set the search mode.
2
Turn the Rotary encoder to select the desired
track, and then press
This will play the selected track.
• Press /ESC in the search mode to cancel. Or, the search mode is
cancelled if no operation is performed for 30 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be cancelled.
/ ),
again.
(REPEAT ALL) play in CD
" indictor lights up.
/ ),
/ENT.