Table of Contents
Advertisement
Chapter 1 Names and Functions
Reading window
Point this at the code to
read.
Trigger switch
Press this to read a code.
The following trigger switch
operating modes are available.
• Auto-off mode
• Momentary switching mode
• Alternate switching mode
• Continuous reading mode 1
• Continuous reading mode 2
The factory default setting is
auto-off mode.
In addition, the auto sensing
mode is also available for
automatic trigger operation.
(Refer to Chapter 6 for details.)
Interface cable
There are two types of interface
cables available.
- RS-232C interface cable
- USB interface cable
The interface cable connects your
scanner to a host computer or other
host equipment.
Depending upon the interface cable
plugged into the scanner, the scanner
automatically switches to the RS-232C
interface or USB-COM interface.
(Refer to Chapter 3 for the cable
connection and setting up of the USB
interface.)
Indicator LED
This turns blue after a successful
read and flashes red if there is an
error.
(Refer to Section 8.2 for details.)
Beep hole
The beeper sounds when
the scanner has read a
code successfully.
1
Advertisement
Table of Contents
