Denso AT10Q-SM User Manual page 91

(13) Data verification conditions and data editing conditions
Items
Data to be verified
Preset registration
Verification start position for data string
verification
Number of characters to verify for data
string verification
(without preset master registration)
Position of data block to verify for data
block verification
Transmission of verification result for a
match
(When verification OK)
Transmission of verification result for a
mismatch
(When verification NG)
Verification retry after fail judgment
in 2-point verification
Verification range
Code type in data editing
Transmit data regardless of the results
Data extraction mode
Data string extraction mode
- Start position
Data string extraction mode
- End position
Data string extraction mode
- Specified position for extraction start
position
Data string extraction mode
- Specified position for extraction last
position
Extraction block mode
- Extraction block number
(Maximum 3 blocks)
(Note 1) Selecting "Any code" edits all types of codes.
Parameters
Data block verification
Data string verification
Enable
Disable
001 to 999 positions
(Specify with ASCII characters)
01 to 99 positions
(Specify with ASCII characters)
01 to 99 positions
(Specify with ASCII characters)
Disable
Enable code data transmission
Enable OK transmission
Disable
Enable code data transmission
Enable OK transmission
Enable
Disable
Code type + code data
Code data only
Selectable from codes available
Enable
Disable
Data string extraction mode
Extraction block mode
AI mode
First position
Last position
Specified position
Last character
Specified digits
Specified position
0001 to 9999 positions
(Specify with ASCII characters)
0001 to 9999 positions
(Specify with ASCII characters)
01 to 99 positions
(Specify with ASCII characters)
: Can be changed only with the configuration software.
81
Defaults Refer to:
√
√
1
99
1
Section 7.1
√
√
√
√
Any code
(Note 1)
√
√
√
Section 7.2
√
1
9999
.
Not specified