Denso AT10Q-SM User Manual page 83

(9) 2D codes, mirror image and black-and-white inverted codes
Items
Reading reverse codes (mirror image)
Reading black-and-white inverted codes
Edit/Non-edit mode for split QR Code
Reading MicroQR
Reading PDF417
Reading MicroPDF417
Reading MaxiCode
Reading DataMatrix (Square)
Reading DataMatrix (Rectangular)
QR Code, minimum version readable
QR Code, maximum version readable
MicroQR, minimum version readable
MicroQR, maximum version readable
Data Matrix (Square),
minimum code number readable
Data Matrix (Square),
maximum code number readable
Data Matrix (Rectangular),
minimum code number readable
Data Matrix (Rectangular),
maximum code number readable
(Note 1) Using the QR-coded parameter menu enables or disables scanning of both Square and Rectangular Data Matrix
symbols at the same time.
(Note 2) The parameter setting ranges are different from versions or code numbers that the scanner can actually read.
Parameters
Enable
Disable
Black cells/bars on a white
background
White cell/bars on a black
background
Auto detection of black and white
inverted codes
Edit mode
Batch edit mode
Non-edit mode
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
1 to 40
1 to 4
1 to 24
1 to 6
: Can be changed only with the configuration software.
73
Defaults Refer to:
Section 7.4
√
√
Section 7.5
√
Section 7.6
√
√
Section 12.2
√
√
√
Section 12.2
(See Note 1.)
√
1
40
1
4
1
Section 12.2
(See Note 2.)
24
1
6