10. Output
Drive Type
Select bypass for a clean sound or one of compressor, rms limiter,
tube overdrive, distortion, tube amp, or fuzz pedal.
Drive Level
Set the amount of drive, from 0 to 100%.
Prgrm Level (Program Level)
Set the amount of non-drive level, from 0 to 100%.
FX Type (Effects Type)
Select bypass for no effect, or select one of the built-in effects.
FX Mix (Effects Mix)
Set the level for the effects-processed audio, from 0 to 100%.
FX Param (Effects Parameters)
Different screens appear in this area depending on the effects type
chosen. Set the effect's parameters here.
6
Programs
Quick access to editing
To jump to the output
category, hold down the
[programs] button and press
the key labeled "output."
71