Fx Type; Clear; Setup Name - Alesis MICRON Reference Manual

5
Setups

6. FX Type

Choose an effect to apply to the setup, or turn the control knob all
the way to the left (or double-click the control knob) to bypass the
effects.
If you do choose an effect, the editable parameters associated with
that effect will be shown in subsequent screens.
Each part and beat has an "FX mix" parameter to control how
much of its sound is passed through the master effects section. If
a part or beat is set to "100% dry", it is unaffected by the setup's
effects

7. Clear

Choose clear to remove all of the parts and beats from the setup
but to retain the setup's name.

8. Setup name

Since setups are listed alphabetically, creative naming can help you
move smoothly from one setup to another.
Turn the control knob to select a position (1 – 14) to edit. Then
press the control knob to edit that position. Edit either by turning
the control knob or pressing notes on the keyboard.
Press a key twice to toggle between upper and lower case.
Inserting and deleting characters
To insert a space in the name, navigate to the position at
which you want to add the space. Hold down the control
knob and turn it clockwise.
To delete a character, navigate past it, hold down the control
knob, and turn it counterclockwise.
In both cases, imagine that you are "dragging" the name
around.
52