Post-Filter Mix Parameters - Alesis MICRON Reference Manual

6
Programs

9. Post-filter mix parameters

Set the mix levels and left-right pan positions for filter 1, filter 2,
and the pre-filter mix.
Also set the following parameters:
Preflt Src (Pre-Filter Source)
You may not want to send all of the pre-filtered sound sources
through the pre-filter source output. The Micron lets you choose
any of the individual sound sources instead, as well as of course
allowing you to choose the mix originally sent to filter 1 or filter 2.
Here are the options:
osc 1
osc 2
osc 3
fltr 1 input mix
fltr 2 input mix
ring mod
noise
Flt 1 Sign (Filter 1 Polarity)
Choose positive polarity for normal summing of the filter 1 and filter
2 signals. Choose negative polarity to throw the two filters out of
phase with one another, creating peaks and notches at various
frequencies.
70
Quick access to editing
To jump to the post-filter mix
category, hold down the
[programs] button and press
the key labeled "postmix."