Troubleshooting - Jacuzzi Platinum 2001 Owner's Manual

*NOTE: See also DISPLAY MESSAGES.
Problem
1. Water not clean.
2. Abnormal water usage.
3. Low water flow from jets.
*NOTE:The skills and tools necessary for the safe repair of this hot tub require the services of
qualified personnel. Contact your Jacuzzi Premium Spas dealer or service organization.
Page 40

Troubleshooting

Probable Cause
A. Clogged or blocked suction
cover or skimmer basket.
B. Filter clogged (dirty).
C. Poor water chemistry.
D. Improper maintenance.
E. High content of solids in
water.
F. Filter motor plug not
connected to the electrical
cabinet.
A. Leak in suction line,
discharge line, or connections.
B. Excessive evaporation and/
or splashing.
A. Low water level.
B. Clogged or blocked suction
cover, or skimmer basket.
C. Dirty filter.
D. Adjustable jet partially
closed.
E. Suction or discharge line
partially plugged.
F. Pump running at subnormal
speed.
G. Worn or damaged pump
seal.
H. Subnormal voltage.
Remedy
A. Clean suction/skimmer
B. Clean or replace filter.
C. See Chemistry section.
D. See Maintenance section.
E. Use clarifier or drain and
refill the hot tub.
F. Check filter
connection on the electrical
cabinet.
A. Repair leak.
B. Use rigid hot tub cover;
lower thermostat setting.
A. Fill to water level indicator
mark on skimmer/filter frame.
B. Clean suction cover or
skimmer basket.
C. Clean or replace filter.
D. Open jet.
E. *
F. *
G. *
H. Call a qualified electrician
or your power company.
motor