Control Panel - Jacuzzi Platinum 2001 Owner's Manual

Operation

Control Panel

The control panel is easy to use with fingertip control of all the hot tub's functions.
FILTER 1
I0IF
HEAT
STANDARD
Temperature Control
When either of these buttons is pressed once, the display will show the temperature that has
been set, in addition to the words SET HEAT. Each time either of these buttons is pressed
again, the set temperature will increase or decrease in increments of 1 F depending on which
button is pressed. After three seconds of inactivity, the display will automatically show the
current hot tub water temperature.
Jets Control
Press this button once to activate a jet pump on one side of the hot tub; press it twice for both
pumps to operate simultaneously for maximum effect. Press it a third time to turn off the jet
pumps. This button does not affect the filter pump operation which is an independent function.
When the jet action mode is started with this button, it will automatically stop after 30 minutes
of operation.
Blower Control
Starts or stops the blower for aeration in the hot tub. Blower operates in all functions. The
blower will also automatically stop after 30 minutes of operation.
Page 16