Inlet - Grizzly G1028Z/G1029 Instruction Manual

3. Slip the steel band around the bag and tight-
en down as shown in Figure 10.
Figure 10. Tightening steel band.
4. Slip the bottom collection bag over the bot-
tom edge of the collector and pull the strap
tight to secure the bag.
5. Place the steel band with the quick clamp
over the bag and clamp on the tightest notch
possible.
DO NOT force the clamp. Instead, choose
the next notch over, then clamp in place.
-14-

Inlet

Press the "Y" inlet onto the inlet cover flange as
shown in Figure 11. The inlet is secured to the
collector body by a press-on fit.
Figure 11. Installing "Y" inlet.
G1028Z/G1029 Dust Collector