Table of Contents
Advertisement
To operate images with the TV remote
To operate images with the TV remote
control
control
1 Set [HDMI CONTROL] to [ON], and turn off the
camera.
2 Connect the camera and TV with an HDMI cable.
"Connection via HDMI cable" (p. 51)
3 First turn on the TV, and then turn on the camera.
●
Operate by following the operation guide that is
displayed on the TV.
With some TVs, operations cannot be performed with
the TV remote control even though the operation
guide is displayed on the screen.
If operations cannot be performed with the TV remote
control, set [HDMI CONTROL] to [OFF] and operate
using the camera.
Saving battery power between shots
Saving battery power between shots
[POWER SAVE]
[POWER SAVE]
s (Settings 2)
POWER SAVE
Submenu 2
OFF
Cancels [POWER SAVE].
When the camera is not being used
for approx. 10 seconds, the monitor
ON
automatically turns off to save
battery power.
To resume standby mode
To resume standby mode
Press any button.
For information on using the menus, see "Using the Menu" (p. 5).
Application
Changing the display language [l
Changing the display language [
l
t (Settings 3)
Submenu 2
The language for the menus and
Languages
error messages displayed on the
monitor is selected.
Setting the date and time [
Setting the date and time [X
X
t (Settings 3)
"Date, time, time zone, and language" (p. 17).
To select the date display order
To select the date display order
1 Press I after setting Minute, and use FG to select
the date display order.
Date order
To check the date and time
To check the date and time
Press the INFO button while the camera is turned off. The
current time is displayed for approx. 3 seconds.
l ] ]
Application
X ] ]
X
Y
M D
TIME
.
.
:
2010
10 26 12 30
Y / M / D
Y / M / D
CANCEL
MENU
SET
OK
EN
53
Advertisement
Table of Contents
