Olympus ?-7050 Instruction Manual page 49

Resetting the fi le names of pictures Resetting the fi le names of pictures
[FILE NAME] [FILE NAME]
s (Settings 2) FILE NAME
Folder name Folder name
DCIM 100OLYMP
999OLYMP
Automatic
numbering
Pmdd
For information on using the menus, see "Using the Menu" (p. 5).
File name
Pmdd0001.jpg
Pmdd9999.jpg
*1
Automatic
Adjusting the CCD and the image Adjusting the CCD and the image
numbering
processing function [PIXEL MAPPING] processing function [PIXEL MAPPING]
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
To adjust the CCD and the image To adjust the CCD and the image
processing function processing function
Press the A button when [START] (Submenu 2) is
displayed.
Submenu 2
This resets the sequential number
for the folder name and fi le name
RESET whenever a new card is inserted.
This is useful when grouping images
on separate cards.
Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name from
AUTO the previous card. This is useful for
managing all image folder names
and fi les names with sequential
numbers.
The number for the folder name is reset to 100, and the
one for the fi le name is reset to 0001.
s (Settings 2)
PIXEL MAPPING
This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
For best results, wait at least one minute after taking
or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.
●
The camera checks and adjusts the CCD and the
image processing function at the same time.
Application
*1
49
EN