Grizzly G0638 Owner's Manual page 25

5.
Attach the two long brace supports to the
filter braces with (4)
⁄ " flat washers, and (4)
3
8
shown in Figure 27.
Figure 27. Long brace supports attached.
6. With assistance, position the rubber mount-
ing gaskets between the filter canisters and
the long brace supports, and secure the can-
isters with (8) ⁄ "-18 x
5
16
" fender washers (see Figure 28).
⁄
5
16
Rubber
Gaskets
Here
Figure 28. Canister filters mounted to the long
support braces.
G0637/G0638 Cyclone Dust Collector
3 ⁄ "-16 x 3 ⁄ " hex bolts, (8)
8 4
⁄ "-16 hex nuts, as
3
8
⁄ " hex bolts and (8)
3
4
Mounting
Bolts
7.
Assemble the 8" x 31
noise mufflers, and the 8" x 4
with the 8" duct clamps (see Figure 29).
Noise
Muffler
Figure 29. Ducting and noise muffler connected
between blower housing and filter canister.
8. Use the 8" duct clamps to connect the duct
assemblies between the outlet port of the
blower housing and the canister filters.
9.
Fit the plastic collection bags over the bottom
of the filters and clamp in place with the metal
bag clamps, as shown in Figure 30.
Bag Clamp
Figure 30. Canister filter collection bag installed.
⁄ " flexible ducts, the
1
2
3 ⁄ " flexible ducts
4
Flexible
Ducts
-23-