Privacy; Sync; Language; Return - EverFocus ed610 Operation Instructions Manual

3.8.4 PRIVACY

This mode covers the areas you do not want to see on the screen.
OFF:
Disable the PRIVACY function.
ON:
AREA SELECT: Please select the area you would like to hide from the 8 areas in AREA
SELECT mode
AREA DISPLAY: Select "ON" to use the area selected in the AREA SELECT. Select
"OFF" to disable this function.
LEFT/RIGHT: Set the coordinate of the horizontal axis 6~98.
WIDTH: Set the size of horizontal area 0~93.
TOP/BOTTOM: Set the coordinate of the vertical axis 0~60.
HEIGHT: Set the size of vertical area 0~61.
COLOR: Set area color. It is selectable from 0 to 15.
Select "RET" to save all settings in PRIVACY menu and returns to the previous menu.
Select "END" to save all the menu settings and exit from OSD menu.

3.8.5 SYNC

There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In
LINE-LOCK mode, the video signal is synchronized to the frequency of the incoming AC power.
The Line-Lock synchronization can only be used when the supply power is 24VAC/60Hz (NTSC
models) or 50Hz (PAL models).
INT:
Internal synchronization
L/L:
External line-lock synchronization

3.8.6 LANGUAGE

Select OSD language. ED610 camera supports multiple languages.

3.8.7 RETURN

Select "RET" to save all settings in SPECIAL menu and returns to the previous menu.
Select "END" to save all the menu settings and exit from OSD menu.

3.9 ADJUST

Adjust sharpness, Blue and Red level in this section.

3.9.1 SHARPNESS

The contour of the video image becomes cleaner and more easily distinguished as the level of
SHARPNESS increases. If the level is set too high it may affect the video image and cause noise.
The available range of level is 0~31.
- 29 -