White Balance - EverFocus EHD630s Operating Instructions Manual

** BLC **
MODE
AREA
MANUAL LEVEL
AUTO LEVEL
RETURN<┘
Submenu of the WDR > BLC mode.
s Menu
- AUTO
Select AUTO to adjust the BLC automatically. The range is 000~015.
- MANUAL LEVEL
Selecting MANUAL lets you select the AREA and MANUAL LEVEL, to adjust the
BLC value manually. The default AREA value is BOTTOM 1/3, and the default
MANUAL LEVEL value is MID. With these default values, the bottom third of the
screen will be the brighter area, using the middle level of brightness.
AREA: BOTTOM 1/3, TOP 2/3, BOTTOM 2/3, LEFT 2/3, and RIGHT 2/3.
MANUAL LEVEL: HIGH, MID, and LOW.

4.4 WHITE BALANCE

The screen color can be adjusted by using the WHITE BALANCE function.
1. Scroll to WHITE BALANCE on the main menu and use the LEFT and RIGHT buttons to
toggle between this menu item's seven mode options.
2. Select the desired mode and press ENTER to open the mode's adjustment submenu.
** MAIN MENU **
LENS
EXPOSURE
WDR
WHITE BALANCE
2DNR & 3DNR
DAY/NIGHT
IMAGE
EFFECT
SYSTEM
┘
EXIT <
ATW (Auto Tracking White Balance)
This mode can be used to view areas with a color temperature range of 1800°K to
10500°K (e.g., around fluorescent lights, outdoors, around sodium vapor lamps or inside
tunnels). Press ENTER if you want to access the ATW setting options.
AWB (Auto White Balance)
Select this to allow the camera automatically adjust the white balance under all
conditions.
AUTO
--
--
|
|||||||||| ||||| 008
┘
AUTO
<
┘
SET
<
OFF
┘
ATW
<
┘
SET
<
┘
AUTO <
┘
SET <
┘
SET
<
┘
SET
<
The BLC modes are AUTO and MANUAL.
The modes for WHITE BALANCE are ATW,
AWB, 3200K, 6300K, ANTI CR, MANUAL, and
PUSH LOCK.
9