Tire Inspection - KYMCO Aglity 50 Owner's Manual

OPERATION
PRI - Front brake lever & fluid inspection
(right lever)
The right brake lever on your Agility scooter controls the front
hydraulic brake. Check the free-play at the end of the lever so
the brake will be responsive and will not drag, which could
cause premature wear to the brake pads or brake rotor.
1. Measure the free-play at the right brake lever end:
0.4 - 0.6 in (10 - 20 mm).
See your KYMCO dealer immediately if the front brake le-
ver free-play is not within specification.
2. Verify that the fluid level is between the "L" mark 1 and the
"F" mark 2 in the brake fluid reservoir window. See the
MAINTENANCE section of this Owner's Manual for addi-
tional information about the front brake fluid.
20
2 2 2 2 2
1 1 1 1 1
PRI - Tire inspection
The condition of your scooter's tires is vital for operational ef-
ficiency and your safety. Check the tires' inflation pressure,
the tread depth, and for damage before each ride.
Front tire (rider only):
Rear tire (rider only):
Front tire (rider & passenger): 17.5 PSI (1.25 kg/cm
Rear tire (rider & passenger): 32.0 PSI ( 2.25 kg/cm
1. Measure and adjust the tire pressure when the tires are
touching the ground (with no person on the scooter).
NOTE: Measure the pressure before riding as the heat gen-
erated during operation may cause improper readings.
17.5 PSI (1.25 kg/cm )
2
29.0 PSI (2.0 kg/cm )
2
)
2
)
2