Cooling System. Tire Inspection - KYMCO PEOPLE 250 Owner's Manual

(3) COOLING SYSTEM
1.Place the scooter on its main stand on level ground.
2.Check if the coolant level of the reserve tank is
between the upper and lower level lines. If necessary,
remove the reserve tank cap and fill to the upper level
line with distilled water.
3.If the coolant level is too low. It means that there are
abnormal conditions.
Inspect the radiator and hoses for coolant leaks.
4.Use only distilled water to refill the reserve tank in
order to ensure good performance of the cooling
H
system. : Upper lever
(4) TIRE INSPECTION
1.Tire Pressure Check
Check if the tire pressure is normal when the tire is in
contact with level ground.
If there is any abnormal condition, check the tire
pressure with a tire pressure gauge.
Measure the tire pressure under room temperature.
The tire pressure must not overpass 2.50kg/cm
L
: Lower lever
2
－22－
H
L