Brake Inspection.tire Inspection - KYMCO Agility 50 Driver Manual

(3) BRAKE INSPECTION (3) BRAKE INSPECTION
Ride the motorcycle at low speed on a dry road and Ride the motorcycle at low speed on a dry road and
respectively apply the front brake lever and rear brake respectively apply the front brake lever and rear brake
pedal to check the brake performance. pedal to check the brake performance.
The brake lever should have proper free play. The brake lever should have proper free play.
" " Free play" means the distance from the position of Free play" means the distance from the position of
loose brake to the position of fully applied brake. loose brake to the position of fully applied brake.
Measure the free play at the brake lever end and check if Measure the free play at the brake lever end and check if
it is within the specified value of (1 cm rear brake). it is within the specified value of (1 cm rear brake).
(4) TIRE INSPECTION (4) TIRE INSPECTION
1. TIRE PRESSURE CHECK 1. TIRE PRESSURE CHECK
Check if the tire pressure is normal when the tire is in Check if the tire pressure is normal when the tire is in
contact with level ground. contact with level ground.
If there is any abnormal condition, check the tire pressure If there is any abnormal condition, check the tire pressure
with a tire pressure gauge. with a tire pressure gauge.
Measure the tire pressure under room temperature. Measure the tire pressure under room temperature.
The tire pressure must not overpass 2.50kg/cm The tire pressure must not overpass 2.50kg/cm
-2 -2
2 2
－ － － －
11 11
1-2cm