Pre-Ride Inspection - KYMCO Aglity 50 Owner's Manual

OPERATION
Pre-ride inspection (PRI)
For your safety, it is very important to take a few moments
before each ride to walk around your scooter and check its
condition. If you detect any problem, be sure to address it im-
mediately, or have it corrected by your KYMCO dealer.
Improperly maintaining your scooter or failing to cor-
rect a problem before riding can cause a crash in which
you can be seriously hurt or killed.
Always perform a pre-ride inspection before every ride
and correct any problems.
1. Engine oil level: Add engine oil if required (page 19). Check
for leaks.
2. Front and rear brakes: Check operation, making sure there
is proper free-play at the left lever, and that there is brake
fluid in the front brake fluid reservoir (pages 19 & 20).
3. Tires: Check condition and inflation pressure (pages 20 & 21).
4. Fuel level: Fill fuel tank when necessary (page 22). Check
for leaks.
18
6. Steering: Check for smooth operation in all steering posi-
tions (page 23).
7. Instruments: Make sure the speedometer, fuel level gauge
and indicator lights function (page 23).
8. Lights and horn: Check that headlight, tail/brake light, turn
signals, indicators and horn function properly (page 24).
9. Chassis: Check for overall proper function (page 25).
Performing pre-ride inspections does not take the place
of regular maintenance. Follow the maintenance sched-
ule recommendations on pages 33 - 50 of this
After one month of use or 200 miles (300 km) of riding,
which ever occurs first, contact your KYMCO dealer to
have an initial service of your scooter performed.
This initial service is most important service in the life
of your scooter and includes checks and adjustments
that will help ensure that your scooter operates effi-
ciently and safely.
manual.