Front Panel Features - Honeywell 5900 RFID User Manual

Front Panel Features

Scan/Decode LED
The LED lights red when a scan fails.
The LED lights green when a scanned bar code is successfully decoded.
The LED lights red while the main battery is charging.
The LED lights green when the main battery charging is completed.
The LED lights blue when data is being downloaded.
Keypad
26-key numeric keypad (alpha shifted) (includes side scan buttons).
Microphone
The integrated microphone can be used for audio recording.
Touch Screen Display
The display is a 3.5" TFT transmissive, 65k color LCD display with a backlight, QVGA (240 x
320 resolution); see
resistive touch.
Optimus 5900 RFID terminals ship with a screen protector already installed over the
touch screen lens to help prevent damage to the touch screen. Do NOT remove this
screen protector before initial use. Honeywell recommends using screen protectors,
especially for applications that require high volume interfacing with the touch screen. For
more information, see
screen protectors by contacting your Honeywell sales representative.
For touch screen input, use the stylus included with the terminal or your finger. The method
you choose depends on which one is most appropriate for your application. While there is a
great deal of variation in different applications, you generally achieve greater accuracy with the
stylus for buttons or icons that are close together.
3 - 2
Touch Screen
Display (screen
protector
installed at the
factory)
Navigation Keys
Display Backlight
Using Screen Protectors
Scan/Decode LED
Software Reset Key
Power Key
on page 3-3. The touch panel is a 4-wire analog
on page 3-3. You can purchase additional