Setting The Auto Profile; Turning Off The Wireless Lan; Adding Programs From The Internet - Honeywell 5900 RFID User Manual

Setting the Auto Profile

Follow the steps below to change to a different Active Profile.
1. Select List from the Main tab. The current Active Profile list appears.
2. Select the Profile to be set and press OK.
3. Select the Auto Profile On radio button.

Turning Off the Wireless LAN

1. After selecting the Up Arrow on the task bar, select, Turn Wireless LAN Off.
If the power of the wireless LAN is turned off when the Network is connected and then the power is turned
on again, the Profile value set previously is maintained.
The wireless LAN cannot be turned on if the battery power is very low. However, if the wireless LAN is on
and the battery power becomes low, it does not turn off.

Adding Programs from the Internet

When you have established a network connection (whether via Wireless LAN, Bluetooth, or ActiveSync,
you can access the Internet and download additional software programs.
When selecting programs, verify that the program and version of the program are designed for Windows CE 5.0 and
the terminal's processor. You can verify your processor by tapping Start > Settings > Control Panel > System >
General tab. Make a note of the information in the Processor field.
1. Open Internet Explorer and navigate to the program's location. You may see a single *.exe or
setup.exe file, or several versions of files for different device types and processors.
2. Select the program version that matches your Optimus 5900 RFID terminal and processor.
3. Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
4. Download the program to the terminal directly from the Internet.
You would normally store the program in the
required by the program.
5. On the terminal, double tap the installer file; e.g., the *.exe file.
6. The installation wizard for the program begins.
7. Follow the directions on the screen to complete installation.
7 - 8
folder unless another location is
\Program Files