Router Setup; Configuring Wan Settings; Static Ip - EnGenius ENS200 User Manual

B N S
ASIC ETWORK ETTINGS

4.3 Router Setup

4.3.1 Configuring WAN Settings

Configure the WAN settings for the ENS200 using a static or dynamic IP address, PPPoE or PPTP.

Static IP

Setting a static IP address allows an administrator
to set a specific IP address for the router and guar-
antees that it can not be assigned a different
address.
Account Name Enter the account name provided
by your ISP.
Domain Name Enter the domain name provided
by your ISP.
MTU The maximum transmission unit (MTU)
specifies the largest packet size permitted for an
internet transmission. The factory default MTU size
for static IP is 1500. The MTU size can be set
between 512 and 1500.
IP Address Enter the router's WAN IP address.
Subnet Mask Enter the router's WAN subnet
mask.
Default Gateway Enter the WAN gateway address.
Primary DNS Enter the primary DNS server address.
4-12
R S
OUTER ETUP