EnGenius ENS200 User Manual page 75

B N S
ASIC ETWORK ETTINGS
4.5.10 Configuring Diagnostics
The diagnosis feature allow the administrator to verify that another device is available on the network and is accepting request pack-
ets. If the ping result returns alive, it means a device is on line. This feature does not work if the target device is behind a firewall or
has security software installed.
Target IP / Domain Name
to search.
Ping Packet Size Enter the packet size of each ping.
Number of Pings Enter the number of times you want to ping.
Start Ping Click Start Ping to begin pinging.
Trace route target Enter an IP address or domain name you
want to trace.
Start Traceroute Click Start Traceroute to begin the
traceroute operation.
Target Address Enter the IP address of the target PC.
Time period Enter time period for the speed test.
Check Interval Enter the interval for the speed test.
Start Speed Test Click Start Speed Test to begin the speed
test operation.
Enter the IP address you would like
4-51
C D
ONFIGURING IAGNOSTICS