EnGenius ENS200 User Manual page 20

I
NSTALLATION
5. Plug the other end of the Ethernet cable into the PoE port
of the PoE injector.
LAN
Figure 2-1: Installing the ENS200
6. Turn over the ENS200. Then insert the mast strap
through the middle hole of the ENS200. Use a screw-
driver to unlock the pole-mounting ring putting it through
the ENS200.
7. Mount the ENS200 securely to the pole by locking the
strap tightly.
This completes the installation procedure.
PoE
2-3
I D
NSTALLING THE EVICE